Contact Us

Reliable Oily-Water
Wastewater Disposal Service in Corpus Christi

Rogue Waste Recovery — Texas-based, family-owned oily-water specialists

Call (361) 446-4390 for a fast quote during business hours (Mon–Fri, 7:00 AM–5:00 PM).
Corpus Christi Office: 1901 W Corpus Christi St, Beeville, TX 78102 • rogue@rogue-enviro.net

Why Proper Oily-Water Disposal Matters

Oily water—whether it comes from machining sumps, wash-down operations, or tank cleanouts—can’t be discharged to a drain or separator and “left to settle.” Hydrocarbons float, solids sink, and what’s in between becomes a regulatory and environmental liability. Discharging untreated oily wastewater risks Clean Water Act violations and state penalties.

Even a small surface sheen indicates oil concentrations above typical discharge limits, exposing your business to:

  • Costly cleanup orders
  • Potential fines and shutdowns
  • Reputational damage with customers and local authorities
  • Accelerated equipment corrosion and downtime
Rogue Waste Recovery removes, transports, and arranges compliant treatment and final disposition of your non-hazardous oily wastewater—so you’re audit-ready and in compliance. We manage water and solids that can be harmful to the environment if mismanaged but are not classified as “hazardous materials” (hazmat) under RCRA. We also service used absorbents generated from oil cleanups—such as absorbent pads, oil-dry/kitty litter, and complete spill-kit contents—once they’ve been used. As a local, family-owned team serving the Coastal Bend, you’ll always speak to an in-house representative during business hours.

The Rogue 3-Step Collection-to-Disposal Process

On-Site Assessment & Vacuum Pickup

A trained technician arrives with a sealed vacuum truck or roll-off, documents the waste stream, and records volume and freeboard. We isolate oils, emulsions, tramp fluids, and sludge from sumps, pits, separators, frac tanks, and drums—without disrupting production. Each load receives a serialized manifest ID for clear cradle-to-grave documentation. Average response from your call to service is typically within 48 hours.

Secure Transport to Our Beeville Facility

Your material is transported in appropriate DOT-rated equipment and never intermingled with incompatible streams. Our fleet is GPS-equipped for internal tracking and safety. You’ll receive pickup paperwork on site and follow-up documentation after processing. (Corpus Christi–area customers are coordinated by our local team for rapid scheduling; routing to permitted facilities, including Conroe when appropriate, is handled by our dispatch.)

Treatment, Recycling & Certified Disposal

Within controlled treatment environments, oily water is separated and treated to meet disposal specifications. Recovered oil is either recycled or used as approved alternative fuel; de-watered solids go to an appropriate Subtitle D landfill. You receive a signed Certificate of Disposal for each batch. While there’s no customer portal, all documentation is delivered directly after pickup for your records.

Recovered oil is blended for re-refining or used as an alternative fuel, while de-watered solids head to an approved Subtitle D landfill. You receive a signed Certificate of Disposal for every batch—proof that your oily wastewater no longer counts toward generator status.

Rock-Solid Compliance

  • TCEQ #: A85929 — transporter/processing credentials
  • EPA Site ID: TXR000042945 — cradle-to-grave reporting
  • USDOT #: 1967388 — transportation compliance
  • Safety-trained crews with relevant annual refreshers
  • Digital recordkeeping — manifests and disposal certificates provided after pickup and available upon request

Industries We Serve

Oil & Gas Producers

produced-water pits, frac-tank cleanouts, rig wash

Marine Terminals & Shipyards

shore-side, land-based oily-water handling (e.g., bilge/slop tanks staged dockside)

Manufacturing & Metalworking

coolant sumps, parts-washer sludge, quench tanks

Automotive & Fleet Maintenance

oily mop water, floor-drain interceptors

Food & Beverage

fryer-grease wastewater, separator skimmings

Municipal Facilities & Utilities

storm-sewer interceptors, lift-station pump-outs

Rail & Trucking Yards

track-pan drainage, wash-rack runoff

If it’s non-hazardous water contaminated with oil, Rogue can remove it—safely and legally.

Five Reasons Clients Switch to Rogue

Advantage

What It Means for You

48-Hour Average Service Time

Typical pickup window within two business days from call-in.

Transparent, Line-Item Pricing

Clear quotes with no tacked-on “paperwork” or fuel fees.

Local, Family-Owned 

Always reach an in-house representative Mon–Fri, 7–5.

Modern, Insured Fleet

Vacuum trucks up to 6,000 gal with secondary containment; GPS tracked internally.

Sustainability Focus

Maximize oil recovery to reduce waste and support ESG goals.

Sustainability & Oil Recycling

Disposal is only half the story. By recovering usable hydrocarbons from your wastewater, Rogue diverts material from incineration and offsets virgin-oil demand. Recovered oils may become:
  • Re-refined base stocks for industrial lubricants
  • Supplemental fuel in cement or asphalt operations
  • Feedstock for designated process heaters
Ask for an annual Environmental Impact Summary to quantify CO₂-equivalent savings that you can share with stakeholders.

Service Area & Response

Based in the Houston metro (with processing in Conroe), we serve the Gulf Coast corridor, including:
  • Corpus Christi industrial districts, refineries, and terminals (shore-side work only)
  • Houston & Galveston industrial districts
  • Beaumont-Port Arthur refineries
  • Eagle Ford and Permian Basin routes (scheduled)
  • Statewide projects by arrangement
Typical service time is ~48 hours from your call during business hours.

Frequently Asked Questions

What contaminants can Rogue accept?

Non-hazardous wastewater containing petroleum hydrocarbons, synthetic oils, tramp coolants, surfactants, light solids, and trace metals. Our services focus on non-hazardous streams—not materials designated as RCRA hazardous waste.

Yes. We pick up used absorbents—including pads, oil-dry/kitty litter, and complete spill-kit contents—after they’ve been deployed to clean up oil. We collect and manage these non-hazardous oily solids for compliant disposal.

Yes—250 gallons for vacuum service and one 55-gallon drum for scheduled LTL pickups. Smaller amounts can often be aggregated into a single service call.

For routine streams (e.g., machining coolants), we may already have profiles on file. New or unusual streams may require a quick lab test to confirm the proper path.

Rates reflect volume, oil-to-water ratio, and distance. Quotes are single line items covering pickup, treatment, disposal, and documentation—no hidden surcharges.

You’ll receive a signed Non-Hazardous Manifest at pickup and a digital Certificate of Disposal after processing. While there’s no customer portal, all documentation is delivered directly for your records.

Our vehicles are GPS-equipped for internal safety and logistics. Location data is used by our team to coordinate efficient service.

Ready for a Clean Transfer?

Call (361) 446-4390 or complete the form below. A Rogue specialist will:
  • Review your oily-water volume and source
  • Provide a firm quote during business hours
  • Schedule pickup—typically within 48 hours
Rogue Waste Recovery — keeping Texas industries compliant, efficient, and environmentally responsible.
 Corpus Christi Office: 1901 W Corpus Christi St, Beeville, TX 78102 • rogue@rogue-enviro.net • TCEQ A85929 • EPA TXR000042945 • USDOT 1967388